Lead letters from Radac
Lead letters, numbers and markers available in two different styles. "Sharp faced" and "Flat faced". Sharp faced is used to get a clean image when using an X-ray tube, while Flat faced is used more for Gamma/Isotope radiography. Available in sizes 6.3mm, 9.5mm, 12.5mm and 19.5mm
Measuring tape for X-rays
Hand-sewn measuring tapes from CG are taped in England. Available in the following standard lengths up to 6 meters in 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m, 5m, 6m meters with 2cm, 5cm and 10cm spacing. 7m, 8m, 9m, 10m, 12m, 15m and 20m are available with 5cm and 10cm spacing. Inches and other lengths on request.
Penetrameter (IQI) from Radac
Lead Letters and Penetrameter (IQI). RADAC EN type indicators are available in steel (FE), stainless steel (SS), aluminum (AL), copper (CU), ICONEL 600 (IN) and titanium (TI). The indicators in steel and stainless steel are for use on most forms of steel and iron. The aluminum indicators are for use on aluminum and its alloys. The copper indicators are used on copper and its alloys. The Inconel indicators are to be used on Inconel Nickel Chromium alloys and the Titanium indicators for use on titanium and its alloys. RADAC manufactures according to European standard EN462-1 / ISO 19232-1-2013 Wire Type IQI and ASTM E747-84a / ASME SE747-97a (Wire Type) penetrameters.
Can be delivered in different widths and lengths. We mostly deliver with 5mm between the threads and at a height of 50mm. They can be supplied in 5mm-10mm, 5mm-25mm up to 5mm-100mm on request. Discounts when buying 10 pcs. or 25 pcs. of a type.
