MR 270-Boîte sous vide
Construction en forme de toit avec bords arrondis pour tester le bord extérieur à 90°.
Longueur de la boîte à vide env. 500 millimètres
Espèces. 5400150
Round vacuum boxes
Item numbers: 596 (D=125mm), 1036 (D=200mm), 1395 (D=250mm), 1913 (D=300mm), 466 (D=400mm)
Vacuumboxes for Special test requirements
Vacuum boxes for testing butt welded circumferential seams
In the miniature-version the sight glass preformed at nominal size covers two diameter ranges; i.e. it is expansible to the next higher diameter range.
Butt seam-vacuum box
Item numbers:
1082 (length approx.150mm with manual slide valve)
1481 (length approx.250mm)
1865 (length approx.300mm)
1016 (length approx.500mm)
1061 (length approx.600mm)
1439 (length approx.750mm)
Overlap fillet weld-vacuum box
Step height 6 mm for sheet thicknesses of 3-9 mm.
1623 (length approx. 500 mm)
121, (length approx. 600 mm)
427 (length approx. 750 mm)
Step height 8 mm for sheet thicknesses of 5-11 mm
1300 (length approx. 500 mm)
1457 (length approx. 600 mm)
1447 (length approx. 750 mm)
Step height 10 mm for sheet thickness 7-13 mm
717 (length approx. 500 mm)
1510 (length approx. 600 mm)
1217 (length approx. 750 mm)
MR 913 Leak detection concentrate
Fluorescent leak detection concentrate for finding the smallest leaks in oil-containing containers, hydraulics or gearboxes
Carrier medium oil (complex ester)
1:1000 dilutable
Crack indication yellow-green fluorescent under UV light
Continuous crack detection without external contamination of the tank
MR 7060 ADI-Test yellow
Yellow and fluorescent pigment powder for leakage tests on filter equipments in exhaust systems.
Properties:
Water and moisture resistant
Solvent resistant
Fluorescent under UV light (365 nm) and at daylight
Particle size: 5 – 8 µm
Temperature stability: 180°C/5 min.
Decomposition: T > 300 °C
No declaration of hazardous ingredients – ECO-Line
90°-fillet weld-vacuum box
Item numbers: 1557 (length approx.500mm), 317 (length approx.600mm)
Straight design for box shaped Containers
Item number: 1475
Miniature 90°-Fillet weld-vacuum box
Special design for testing 90° edges of collecting basins acc. to German GefStoffVO for dangerous liquids (for basin heigths from ca. 40 mm)
Length vacuum box approx. 250 mm
incl. reducing adapter
Leak detection unit VSP 1TS
suction power at 100 kPa ca. 8 m³/h
end vacuum controllable up to appr. 15 kPa, corresp. negative pressure up to app. -85 kPa, mains supply
230 V / 50 Hz
power draw 0,37 kW
measurements approx. 440 x 200 x 400 mm
weight appr. 19 kg
3×90°-edge weld-vacuum box
Item number: 1404
For testing internal 3×90° edge seams
• Edge length 3 x approx. 270 mm Art. 5500127
Item number: 271
Miniature 3×90°-Edge weld-vacuum box incl. reducing adapter
Special design for testing the inner 3×90° edges of collecting basins acc.to German GefStoffVO for dangerous liquids (for basin heights from ca. 40 mm)
Edge length 3 x approx. 60 mm Art. 5500206
Vacuum manometer
985 (Vacuum-manometer for leak detection unit VSP 1TS, Ø 63 mm)
1750 (Vacuum-manometer for leak detection unit VSP 2TS, Ø 63 mm)
900 (Vacuum-manometer for vacuum boxes, Ø 40 mm)
MR 99 Leak detector
Leak detector for finding the smallest leaks on all objects under gas or air pressure or with the aid of a vacuum bell jar
Forms a transparent film after spraying, which throws bubbles at the leakage points
Applicable for checking gas fittings, piping systems, pressure vessels, etc.
MR 7062 ADI-Test pink
Pink and fluorescent pigment powder for leakage tests on filter equipments in exhaust systems.
Properties:
Water and moisture resistant
Solvent resistant
Fluorescent under UV light (365 nm) and at daylight
Particle size: 5 – 8 µm
Temperature stability: 180°C/5 min.
Decomposition: T > 300 °C
No declaration of hazardous ingredients – ECO-Line
MR 99 A Leak detector
Leak detector for finding the smallest leaks on all objects under gas or air pressure or with the aid of a vacuum bell jar
Forms a transparent film after spraying, which throws bubbles at the leakage points
Applicable for checking gas fittings, piping systems, pressure vessels, etc.
MR 7061 ADI-Test green
Green and fluorescent pigment powder for leakage tests on filter equipments in exhaust systems.
Properties:
Water and moisture resistant
Solvent resistant
Fluorescent under UV light (365 nm) and at daylight
Particle size: 5 – 8 µm
Temperature stability: 180°C/5 min.
Decomposition: T > 300 °C
No declaration of hazardous ingredients – ECO-Line